2.4MM CS X 25.3MM ID BLACK BUNA 90D

H90M2.4X25.3 is a black Buna-N (Nitrile) 90 Shore A O-Ring built to an inside diameter of 25.3 mm (0.996 in), a cross section of 2.4 mm (0.094 in), and an outside diameter of 30.1 mm (1.19 in). In service, this o-ring seats in a machined groove and forms a leak-tight barrier when compressed between two mating surfaces.

Buna-N (Nitrile) is valued for strong abrasion and tear resistance, low compression set under sustained load. This material stands up to propane and butane, greases and lubricants, and water. The material carries a published service range of -40°F (-40°C) to 250°F (121.1°C). It should not be specified for service in automotive brake fluid or polar solvents.

Common environments for this compound include agricultural equipment, construction equipment, and general industrial maintenance.

Order part number H90M2.4X25.3, sold individually. Confirm chemical compatibility, pressure and temperature against your own application requirements before installing. If you need a size, durometer or compound that is not listed, APG can cross-reference from a print, a sample or a competitor part number.