Q-135 FLUOROELASTOMER 75 Q RING

Part number QV70135 is an AS568-135 black Viton® (FKM) 75 Shore A Quad-Ring measuring an inside diameter of 1.925 in (48.9 mm), a cross section of 0.103 in (2.62 mm), and an outside diameter of 2.131 in (54.13 mm). A quad-ring delivers lower friction and better sealing stability than a comparable round-section o-ring.

Viton® (FKM) delivers excellent resistance to compression set and permeation, very low compression set at elevated temperature. This material stands up to many acids, chlorinated solvents, and petroleum oils and fuels. Continuous operating temperature is published at -15°F (-26.1°C) to 400°F (204.4°C). The profile itself contributes lower compressive load required to achieve a seal and a parting line located away from the sealing surface.

Typical settings include aerospace, automotive fuel systems, and oil and gas.

QV70135 ships individually. Unit weight is approximately 1.7472 g and nominal inside diameter is listed as 1 15/16 inch. Review your operating media and conditions against this specification before installation. Not finding the exact configuration you need? APG cross-references from prints, samples and competitor part numbers.