-034 RED SILICONE 70D O-RING

This o-ring is supplied in AS568-034 red Silicone 70 Shore A supplied with an inside diameter of 2.114 in (53.7 mm), a cross section of 0.07 in (1.78 mm), and an outside diameter of 2.254 in (57.25 mm), catalogued under part number S70034. It seats in a machined groove and forms a leak-tight barrier when compressed between two mating surfaces.

Silicone is widely chosen for excellent electrical insulating properties and very good compression set resistance across its range. This material stands up to extreme heat and cold, weathering, and ozone and UV exposure. Published continuous service range is -80°F (-62.2°C) to 450°F (232.2°C). Verify compatibility before use with steam above its rated range or hydrocarbon fuels and oils.

Typical settings include electronics and electrical enclosures, ovens and heated equipment, and sanitary process lines.

S70034 ships individually. Unit weight is approximately 0.63 g. Confirm chemical compatibility, pressure and temperature against your own application requirements before installing. APG can cross-reference from an existing part number, a drawing or a physical sample if this size is not an exact match.