2MM CS X 10MM ID RED SILICONE 70D

Part number S2X10 is a red Silicone 70 Shore A O-Ring supplied with an inside diameter of 10 mm (0.394 in), a cross section of 2 mm (0.079 in), and an outside diameter of 14 mm (0.55 in). An o-ring seats in a machined groove and forms a leak-tight barrier when compressed between two mating surfaces.

Silicone is specified here for physiological inertness and low toxicity, excellent electrical insulating properties. This material stands up to weathering, many oxidizing chemicals, and dry heat. Rated temperature range runs from -80°F (-62.2°C) to 450°F (232.2°C) in continuous service. Exposure to concentrated acids or hydrocarbon fuels and oils will shorten service life.

The compound meets FDA requirements for food contact. You will find this material specified across ovens and heated equipment, food and beverage processing, and sanitary process lines.

S2X10 ships individually. Unit weight is approximately 0.1659 g. Review your operating media and conditions against this specification before installation. APG can cross-reference from an existing part number, a drawing or a physical sample if this size is not an exact match.