568-112 FKM 75 SQUARE CUT RINGS

Ordered as SV70112, this is an AS568-112 black Viton® (FKM) 70 Shore A Square-Cut Ring with an inside diameter of 0.487 in (12.37 mm), a cross section of 0.103 in (2.62 mm), and an outside diameter of 0.693 in (17.6 mm). The square-cut ring presents a flat rectangular section that cannot roll or twist in its groove, making it a dependable static seal.

Viton® (FKM) is specified here for outstanding high-temperature capability and industry benchmark where nitrile reaches its thermal limit. The compound resists aggressive chemicals, many acids, and aromatic hydrocarbons. Rated temperature range runs from -15°F (-26.1°C) to 400°F (204.4°C) in continuous service. The profile itself contributes simple lathe-cut manufacture at low tooling cost and a rectangular section that will not roll in the groove. Note that a square section is less suited to high-speed rotary service, where the larger contact area raises friction and heat.

You will find this material specified across oil and gas, chemical processing, and automotive fuel systems.

SV70112 ships individually. Unit weight is approximately 0.472 g. Check the compound against your process media, pressure and temperature before committing to a design. APG can cross-reference from an existing part number, a drawing or a physical sample if this size is not an exact match.