-223 RED FEP ENCAPSULATED SILICONE 85D

PTFE-Encap. Silicone O-Ring, 1.609 in ID x 0.139 CS, 70A, Red, -75 to 400°F

Status
Out of Stock
Est. Ship Date
14 Jan 2027
Material
Teflon encapsulated Silicone core
Dash Size
223
Durometer
70 Shore A
Cross Section Type
Round
Color
Red
Minimum Temperature
-75°F (-59.4°C)
Maximum Temperature
400°F (204°C)
Nominal Cross Section
1/8 inch
Nominal Inside Diameter
1 5/8 inch
Nominal Outside Diameter
1 7/8 inch
Unit of Measure
EA
SKU:
TES70223

Product Specification

-
Ordered as TES70223, this is an AS568-223 red PTFE-Encapsulated Silicone 70 Shore A O-Ring supplied with an inside diameter of 1.609 in (40.87 mm), a cross section of 0.139 in (3.53 mm), and an outside diameter of 1.887 in (47.93 mm). The o-ring seats in a machined groove and forms a leak-tight barrier when compressed between two mating surfaces. Supplementary detail from the product record: ORING 70 Durometer.

PTFE-Encapsulated Silicone is specified here for non-contaminating, non-stick sealing surface and strong resistance to permeation. Expect good resistance to nearly all process chemicals, steam, and wide temperature swings. Service temperature is rated from -75°F (-59.4°C) through 400°F (204.4°C). It is not the right choice where tight-radius dynamic flexing or installation over sharp edges are present.

It sees regular use in chemical processing, pharmaceutical manufacturing, and food and beverage processing.

Stocked as TES70223 and sold individually. Confirm chemical compatibility, pressure and temperature against your own application requirements before installing.
Item
TES70223
Description
-223 RED FEP ENCAPSULATED SILICONE 85D
Actual Cross Section
0.139 inch (3.53 mm)
Actual Inside Diameter
1.609 inch (40.87 mm)
Actual Outside Diameter
1.887 inch (47.93 mm)
FDA Compliant
No
Measurement System
Imperial
Metal Detectable
No
NSF Certified
No
Product Code
6006
Product Category
O-Rings - Bulk - Premium