This o-ring is supplied in AS568-268 red PTFE-Encapsulated Silicone 70 Shore A with an inside diameter of 8.484 in (215.49 mm), a cross section of 0.139 in (3.53 mm), and an outside diameter of 8.762 in (222.55 mm), catalogued under part number TES70268. It seats in a machined groove and forms a leak-tight barrier when compressed between two mating surfaces. Additional detail on this item: ORING 70 Durometer.
Expect good resistance to strong acids and solvents, nearly all process chemicals, and steam. PTFE-Encapsulated Silicone is known for chemical inertness of PTFE with the wide temperature range of silicone and excellent recovery across extreme temperature cycling. Continuous operating temperature is published at -75°F (-59.4°C) to 400°F (204.4°C).
Common environments for this compound include chemical processing, food and beverage processing, and pharmaceutical manufacturing.
Reference part number TES70268 when ordering; the item is sold individually. Nominal inside diameter is listed as 8 1/2 inch. As always, verify media compatibility and operating conditions against the requirements of your specific application. APG can cross-reference from an existing part number, a drawing or a physical sample if this size is not an exact match.
Description -268 RED FEP ENCAPSULATED SILICONE 85D
Actual Cross Section 0.139 inch (3.53 mm)
Actual Inside Diameter 8.484 inch (215.49 mm)
Actual Outside Diameter 8.762 inch (222.55 mm)
Measurement System Imperial
Product Category O-Rings - Bulk - Premium