Part number TES70350 is an AS568-350 red PTFE-Encapsulated Silicone 70 Shore A O-Ring supplied with an inside diameter of 4.6 in (116.84 mm), a cross section of 0.21 in (5.33 mm), and an outside diameter of 5.02 in (127.51 mm). An o-ring seats in a machined groove and forms a leak-tight barrier when compressed between two mating surfaces. This item is further identified as ORING 70 Durometer.
PTFE-Encapsulated Silicone is specified here for non-contaminating, non-stick sealing surface and seamless PTFE jacket over a resilient silicone core. This material stands up to strong acids and solvents, wide temperature swings, and steam. Rated temperature range runs from -75°F (-59.4°C) to 400°F (204.4°C) in continuous service. It is not the right choice where installation over sharp edges or tight-radius dynamic flexing are present.
Typical settings include food and beverage processing, chemical processing, and cryogenic and high-temperature equipment.
TES70350 ships individually. Nominal inside diameter is listed as 4 5/8 inch. Confirm chemical compatibility, pressure and temperature against your own application requirements before installing. APG can cross-reference from an existing part number, a drawing or a physical sample if this size is not an exact match.
Description -350 RED FEP ENCAPSULATED SILICONE 85D
Actual Cross Section 0.21 inch (5.33 mm)
Actual Inside Diameter 4.6 inch (116.84 mm)
Actual Outside Diameter 5.02 inch (127.51 mm)
Measurement System Imperial
Product Category O-Rings - Bulk - Premium