TES70417 is an AS568-417 red PTFE-Encapsulated Silicone 70 Shore A O-Ring with an inside diameter of 3.475 in (88.27 mm), a cross section of 0.275 in (6.99 mm), and an outside diameter of 4.025 in (102.24 mm). In service, this o-ring provides a reliable static or dynamic seal by deforming into its gland under assembly load. Source specification: ORING 70 Durometer.
As a material, PTFE-Encapsulated Silicone is specified for chemical inertness of PTFE with the wide temperature range of silicone and a non-contaminating, non-stick sealing surface. This material stands up to steam, nearly all process chemicals, and wide temperature swings. Published continuous service range is -75°F (-59.4°C) to 400°F (204.4°C). Exposure to tight-radius dynamic flexing or installation over sharp edges will shorten service life.
Typical settings include pharmaceutical manufacturing, food and beverage processing, and cryogenic and high-temperature equipment.
Order part number TES70417, sold individually. Nominal inside diameter is listed as 3 1/2 inch. Application requirements vary, so validate compatibility with your process conditions prior to installation. If you need a size, durometer or compound that is not listed, APG can cross-reference from a print, a sample or a competitor part number.
Description -417 RED FEP ENCAPSULATED SILICONE 85D
Actual Cross Section 0.275 inch (6.99 mm)
Actual Inside Diameter 3.475 inch (88.27 mm)
Actual Outside Diameter 4.025 inch (102.24 mm)
Measurement System Imperial
Product Category O-Rings - Bulk - AS568 Premium