-340 WHITE PTFE 55D SPIRAL BACK-UP RING

PTFE Back-Up Ring, 3.35 in ID x 0.21 CS, 55D, White, -65 to 500°F

Status
Out of Stock
Est. Ship Date
Material
PTFE (Polytetrafluoroethylene)
Dash Size
340
Durometer
55 Shore D
Cross Section Type
Round
Color
White
Minimum Temperature
-65°F (-53.9°C)
Maximum Temperature
500°F (260°C)
Nominal Cross Section
3/16 inch
Nominal Inside Diameter
3 3/8 inch
Nominal Outside Diameter
3 3/4 inch
Unit of Measure
EA
SKU:
TSP340

Product Specification

-
The TSP340 is an AS568-340 white PTFE (Teflon) 55 Shore D Back-Up Ring measuring an inside diameter of 3.35 in (85.09 mm), a cross section of 0.21 in (5.33 mm), and an outside diameter of 3.77 in (95.76 mm). This back-up ring installs on the low-pressure side of an o-ring to prevent extrusion into the clearance gap at elevated pressure.

PTFE (Teflon) is specified for one of the lowest coefficients of friction of any solid and excellent dielectric properties. This material stands up to oxidizing media, nearly all industrial chemicals, and strong acids and bases. Continuous operating temperature is published at -65°F (-53.9°C) to 500°F (260°C). Applications involving elemental fluorine at temperature or service requiring elastic recovery call for a different compound.

Common environments for this compound include semiconductor fabrication, pharmaceutical and biotech, and laboratory equipment.

Order part number TSP340, sold individually. Application requirements vary, so validate compatibility with your process conditions prior to installation.
Item
TSP340
Description
-340 WHITE PTFE 55D SPIRAL BACK-UP RING
Actual Cross Section
0.21 inch (5.33 mm)
Actual Inside Diameter
3.35 inch (85.09 mm)
Actual Outside Diameter
3.77 inch (95.76 mm)
FDA Compliant
No
Measurement System
Imperial
Metal Detectable
No
NSF Certified
No
Product Code
6002
Product Category
O-Rings - Backup Rings