This back-up ring is supplied in AS568-011 white PTFE (Teflon) 55 Shore D supplied with an inside diameter of 0.301 in (7.65 mm), a cross section of 0.07 in (1.78 mm), and an outside diameter of 0.441 in (11.2 mm), catalogued under part number TST011. It extends o-ring service life by supporting the seal against extrusion under high pressure.
As a material, PTFE (Teflon) delivers one of the lowest coefficients of friction of any solid and non-stick, non-contaminating surface characteristics. This material stands up to solvents, steam, and strong acids and bases. The material carries a published service range of -65°F (-53.9°C) to 500°F (260°C). Exposure to elemental fluorine at temperature or service requiring elastic recovery will shorten service life.
It sees regular use in pharmaceutical and biotech, semiconductor fabrication, and aggressive-media pipelines.
TST011 ships individually. Nominal inside diameter is listed as 5/16 inch. As always, verify media compatibility and operating conditions against the requirements of your specific application.
Description -011 WHITE PTFE 55D SINGLE TURN
Actual Cross Section 0.07 inch (1.78 mm)
Actual Inside Diameter 0.301 inch (7.65 mm)
Actual Outside Diameter 0.441 inch (11.2 mm)
Measurement System Imperial
Product Category O-Rings - Backup Rings