-130 WHITE PTFE 55D SOLID BACK-UP RING

PTFE Back-Up Ring, 1.612 in ID x 0.103 CS, 55D, White, -65 to 500°F

Status
Out of Stock
Est. Ship Date
6 Mar 2027
Material
PTFE (Polytetrafluoroethylene)
Dash Size
130
Durometer
55 Shore D
Cross Section Type
Round
Color
White
Minimum Temperature
-65°F (-53.9°C)
Maximum Temperature
500°F (260°C)
Nominal Cross Section
3/32 inch
Nominal Inside Diameter
1 5/8 inch
Nominal Outside Diameter
1 13/16 inch
Unit of Measure
EA
SKU:
TST130SO

Product Specification

-
The TST130SO is an AS568-130 white PTFE (Teflon) 55 Shore D Back-Up Ring measuring an inside diameter of 1.612 in (40.94 mm), a cross section of 0.103 in (2.62 mm), and an outside diameter of 1.818 in (46.18 mm). This back-up ring allows a standard o-ring to operate at higher pressures than it could unsupported.

The material holds up against steam, solvents, and strong acids and bases. That behavior comes from the compound itself: PTFE (Teflon) is widely chosen for one of the lowest coefficients of friction of any solid and non-stick, non-contaminating surface characteristics. Published continuous service range is -65°F (-53.9°C) to 500°F (260°C). It is not the right choice where service requiring elastic recovery or elemental fluorine at temperature are present.

It sees regular use in chemical processing, aggressive-media pipelines, and laboratory equipment.

Stocked as TST130SO and sold individually. As always, verify media compatibility and operating conditions against the requirements of your specific application.
Item
TST130SO
Description
-130 WHITE PTFE 55D SOLID BACK-UP RING
Actual Cross Section
0.103 inch (2.62 mm)
Actual Inside Diameter
1.612 inch (40.94 mm)
Actual Outside Diameter
1.818 inch (46.18 mm)
FDA Compliant
No
Measurement System
Imperial
Metal Detectable
No
NSF Certified
No
Product Code
6002
Product Category
O-Rings - Backup Rings