You have no items in your shopping cart.

*2103-210 TEFLON SOLID BACKUP FDA

PTFE Back-Up Ring, 0.734 in ID x 0.139 CS, 55D, White, -65 to 500°F

Available Stock
54
Status
Available
Material
PTFE (Polytetrafluoroethylene)
Dash
210
Durometer
55 Shore D
Cross_Section_Type
Round
Color
White
Minimum_Temp
-65°F (-53.9°C)
Maximum_Temp
500°F (260°C)
Nominal_CS
1/8 inch
Nominal_ID
3/4 inch
Nominal_OD
1 inch
u_m
EA
SKU:
TST210SO
$0.6461
- +

Product Specification

-
TST210SO is an AS568-210 white PTFE (Teflon) 55 Shore D Back-Up Ring measuring an inside diameter of 0.734 in (18.64 mm), a cross section of 0.139 in (3.53 mm), and an outside diameter of 1.012 in (25.7 mm). In service, this back-up ring allows a standard o-ring to operate at higher pressures than it could unsupported.

As a material, PTFE (Teflon) delivers one of the lowest coefficients of friction of any solid and excellent dielectric properties. The material holds up against solvents, nearly all industrial chemicals, and oxidizing media. Continuous operating temperature is published at -65°F (-53.9°C) to 500°F (260°C). It is not the right choice where elemental fluorine at temperature or service requiring elastic recovery are present.

Typical settings include food and beverage, laboratory equipment, and pharmaceutical and biotech.

This item is sold individually under part number TST210SO. As always, verify media compatibility and operating conditions against the requirements of your specific application.
item
TST210SO
description
*2103-210 TEFLON SOLID BACKUP FDA
Product_ID
TST210SO
Actual_CS
0.139 inch (3.53 mm)
Actual_ID
0.734 inch (18.64 mm)
Actual_OD
1.012 inch (25.7 mm)
FDA
No
Measure
Imperial
Metal_Detectable
No
NSF
No
ProductCode
6002
ProductCode Description
O-Rings - Backup Rings
UF_Backorderable
0