APG stocks the TST341, an AS568-341 white PTFE (Teflon) 55 Shore D Back-Up Ring measuring an inside diameter of 3.475 in (88.27 mm), a cross section of 0.21 in (5.33 mm), and an outside diameter of 3.895 in (98.93 mm). A back-up ring installs on the low-pressure side of an o-ring to prevent extrusion into the clearance gap at elevated pressure.
PTFE (Teflon) is specified here for very wide continuous service temperature range and non-stick, non-contaminating surface characteristics. It resists nearly all industrial chemicals, oxidizing media, and solvents. Published continuous service range is -65°F (-53.9°C) to 500°F (260°C). Verify compatibility before use with elemental fluorine at temperature or service requiring elastic recovery.
Maintenance and OEM teams specify it across aggressive-media pipelines, laboratory equipment, and pharmaceutical and biotech.
Stocked as TST341 and sold individually. Nominal inside diameter is listed as 3 1/2 inch. Check the compound against your process media, pressure and temperature before committing to a design. APG supports cross-referencing from drawings, samples and competitor numbers when a listed size is not an exact fit.
Description -341 WHITE PTFE 55D SINGLE TURN
Actual Cross Section 0.21 inch (5.33 mm)
Actual Inside Diameter 3.475 inch (88.27 mm)
Actual Outside Diameter 3.895 inch (98.93 mm)
Measurement System Imperial
Product Category O-Rings - Backup Rings